Vishva Parimal 1980

Vishva Parimal 1980

Postby Sunderland Tugs » Thu Jan 29, 2015 7:10 pm

1980_1copy.jpg
Picture from Rob Meldrum.
Vishva Parimal at Palmershill Quay not long after her launch on 11th July 1980.
Cheers, Anthony.
Sunderland Tugs
 
Posts: 16
Joined: Sun Sep 08, 2013 12:12 pm
Location: Glasgow

Re: Vishva Parimal 1980

Postby TEESMAN » Sun Jul 26, 2015 10:22 am

VISHVA PARIMAL 270286a.jpg
Photo Michael Green
VISHVA PARIMAL 270286b.jpg
Photo Michael Green
VISHVA PARIMAL on The Tees 27.02.86
TEESMAN
 
Posts: 7335
Joined: Mon Jun 04, 2012 7:45 pm

Re: Vishva Parimal 1980

Postby fitter » Thu Sep 10, 2015 9:52 pm

One of a series of six ships built for the Shipping Corporation of India. As part of an overseas aid package to India from Britain, the aid was conditional on the Indians using it to buy ships, (and aeroplanes as well I think). The Indians were not in the least pleased about that, they just wanted money. In retaliation, they insisted on a lot of unnecessary work to be done on the ships. One such case was that of ladders. Normally all the ladders, made for every ship built at Thompsons, Laings or Doxfords were made at the then, Sunderland Shipbuilders Group Blacksmiths shop at J.L. Thompsons, just east of Palmers Hill, the former plumbers shop. Normal practice was for a completed ladder to be marked with ink bottle, (for example), “908 Ship, Ladder no 45, no 2 LWT Stbd.,” (Lower Wing Tank Starboard). Ladders would be sent to the respective ships to be fitted with appropriate lugs (bars) for fixing to the ships structure. The Indians insisted that all ladders must be galvanised. As such, the identification would be burned off during galvanising, so welders in the blacksmiths had to write on the identification in welding. The ladders then went to Teesside for galvanising, brought back, re-sorted and sent to the ships. The additional time and cost of welding were small compared to the disruption to the production schedule, ladders having to be made earlier than needed, handled, transported, galvanised, transported back, unloaded then sorted. It wouldn’t be surprising if there are still some of those ladders salvaged in Chittagong, Mumbai, Alang, Kaohsuing etc !! Another instance was that of the Indians insisting that inside of some oil tanks had to be ground with hand held grinding machines, despite having being shot blasted and primed as steel plates. The exercise was soon found to be futile when paint wouldn’t adhere to the abnormally smooth steel, so the surface of the tank then had to be roughened with pin guns to provide a key for the paint. There were dozens of other instances that cost the British, much more than they need have.
I have the contracts as:
Laings Yard no 908 Vishva Pankaj launched 21.09.79
Laings Yard no 909 Vishva Pallev launched 03.03.80
Laings Yard no 910 Vishva Parimal launched 11.07.80

Doxfords Yard no 14 Vishva Parijat floated out 16.03.80
Doxfords Yard no 15 Vishva Parag floated out 16.03.80
Doxfords Yard no 16 Vishva Prafulla floated out 16.03.80
fitter
 
Posts: 354
Joined: Fri Mar 01, 2013 8:48 pm

Re: Vishva Parimal 1980

Postby Dennis Maccoy » Thu Dec 10, 2015 12:53 pm

Outfitting on 28 September 1980.
Vishva Parimal, 28 September 1980_2_1.jpg
Regards, Dennis.
Dennis Maccoy
 
Posts: 1810
Joined: Thu May 31, 2012 7:37 pm
Location: South Shields


Return to Laing / Deptford

Who is online

Users browsing this forum: No registered users and 3 guests

cron