NORTH EAST MARINE ENGINE BUILDERS

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Mon Oct 22, 2018 8:41 pm

Brown Curtis turbines built under licence by Doxfords for their twin screw Torpedo Boat Destroyers.
I THINK Curtis were an American design and John Brown had a Licence to build them and Doxfords built these, under licence from John Brown.
Brown Curtis turbines.JPG
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Thu Nov 01, 2018 7:21 pm

Doxford J4 top platform, don't know which one. It was one of the last because the transverse beams seen here are those designed for the Seahorse engine that was never built commercially but the design of some of its components were applied in the 58JS3 engines like the one at Beamish.
J4 ENGINE 2.JPG
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Wed Dec 05, 2018 9:13 pm

Cammell Lairds ????
cammell lairds.JPG

Merry Christmas
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby Whickham » Sun Dec 09, 2018 6:54 pm

As far as I am aware Armstrong Whitworth were unique among the major Tyneside shipbuilders of the 1920-30s in that they didn't have their own engine building facility. Lloyds register often cites the engine builder of their ships as Armstrong, Whitworth & Co (Engineers) Ltd, however I suspect they were just the installers of bought in engines.
I came across this Armstrong Whitworth & Co Ltd publicity photograph on the web of an Armstrong-Sulzer 6S60 engine (delivering 2,250hp at 114rpm).
I presume that it is really just a Sulzer as opposed to say a Hawthorn Doxford that would have been built by Hawthorn under licence from Doxford.
But I may be wrong.

Armstrong Sulzer.jpg
Dave
Whickham
 
Posts: 8308
Joined: Sat May 12, 2012 9:10 pm
Location: Whickham, Gateshead

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Wed Jan 02, 2019 9:52 pm

SECTIONS THROUGH DOXFORD J TYPE ENGINES
DOXFORD J TYPE ELEVATION.JPG


DOXFORD J TYPE ENGINE SECTION (2).JPG


DOXFORD J TYPE RUNNING GEAR.JPG
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Tue Mar 12, 2019 8:46 pm

Doxford P type engine running gear. All P type engines were 670mm bore.
RUNNING GEAR P.JPG





Doxford P type engine Centre Crosshead
CENTRE CROSS HEAD P.JPG


Doxford P type engine Side Crosshead
SIDE CROSSHEAD P.JPG
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Re: NORTH EAST MARINE ENGINE BUILDERS

Postby fitter » Mon May 20, 2019 8:46 pm

Sir James Laing's "Troutbank" 1979 with a Doxford 76J4C engine on the other end of the shaft. I wonder how many, like me, would love to be back doing that work with men that we took for granted but, looking back, were the salt of the earth?
907 troutbank sjl 1979.jpg
fitter
 
Posts: 363
Joined: Fri Mar 01, 2013 8:48 pm

Previous

Return to Doxford / Pallion

Who is online

Users browsing this forum: No registered users and 5 guests

cron